| STORE
HOURS 9 TO 5 EST Monday thru Friday Do not call on Sat. Sun. please |

| ORDERING
INFORMATION: MINIMUM
ORDER: Minimum Order is Variable SHIPPING
POLICY: Minimum $9.00 Higher
shipping cost for heavy items You
MUST browse the Catalog
area, and try to learn what you want. We no longer search our catalog for you.
Have
this information ready: 1. Description of parts
2. Part Numbers 3. Prices
4. Dimensions where needed BEFORE you call us please. Make
sure you are in the catalog area for your kind of piano-- Such as Grand
Pianos, Full Uprights,
Spinets, etc. If
you are confused, do not phone us until you have SENT
E-MAIL and asked for help. If
we do not answer the phone, we are probably here-- Just try again a little later.
We don't answer our phone mail too well. :-) | PIANO
DESKS And Lid Props
Piano
desks are very vulnerable since the are often the most fragile part of the piano,
and, to make things worse, they get loaded down too heavy with books. Spinet
and console desks are mounted with two small hinges at the base of the desk. This
plan is followed by 90% of piano makers, and it is insane. Grand desks are
made to hang all the way across the piano on two small rails. The desk itself
often comes in three pieces which some genius thought would carry the weight.
So, here are our desk offerings in case you or the moving man busted yours.
SEARCH
THE WHOLE SITE Return
Policy on Wood and Furniture Products When
you receive a desk or other wood part which must be stained and finished,
EXAMINE IT BEFORE YOU PROCEED. If there is any flaw which you cannot deal
with, it must be returned. If you alter the product, or if you stain it,
we cannot return your payment. If you find a flaw after staining or fitting
the product, WE WILL NOT REFUND YOUR MONEY. CAVEAT EMPTOR Also, you must
call us at (800) 338-8863 for instructions to return the product. If you return
it to us, we will deduct shipping costs to return it to our supplier. It
must be returned to our supplier. If you send it back without notifying
us and following instructions, you may not receive a refund if our suppler
does not know you are our customer. Spinet,
Console, and Studio Desk KIT (May fit Grand Pianos in need of the hinged book
rest) These desks are unfinished, but they are fine sanded
maple veneer on both sides. Ends are rough sanded. 1/2" thick.
End hinges are down the page if you need new ones.
Width
Height Veneer
Order No. Price
26" 8-1/2"
Maple SH856AH
$ 39.50
np 28" 8-1/2"
Maple SH856BH
$ 39.50
np Both of these desks call for flat hinges.
28" 9-1/2"
Maple SH857AH
$ 51.50
np 30" 9-1/2"
Maple SH857BH
$ 51.50
np 34"
9-1/2" Maple
SH858CH $ 51.50
np 30"
9-1/8" Maple
SH857CH
$ 51.50 np
These desks can use hinges of end hinges All
Purpose Desk-- Inquire--
May be out of stock Mahogany
and Walnut choices. This desk has cherry veneer
on both sides and can be successfully finished
in almost any color with the use of stains. These
desks often fit perfectly into Grand Piano desks needing a new book rest.
30" x 9-1/2" Walnut
SH857BW $ 42.00
np 30" x 9-1/2"
Mahogany
SH857BM
$ 42.00
np 34" x 11"
Walnut
SH858CW
$ 46.00
np 34" x 11"
Mahogany
SH858CM $ 46.00
np
Brass
End Hinges for Spinet and Console Piano Desks
Pair of hinges come with machine screws to mount to level desk area,
but NOT with brass wood screws
to mount hinges to desk. See below If your holes
on the level part under the desk are 28 inches apart, or some other
distance not matching our desks, you will want to do the
following:
1. Buy the desk next longer than
yours, never shorter.
This is so that the old holes are UNDER the new desk
and unseen. 2. Drill
new holes in line with the old ones, centering the desk precisely.
3. Make sure the new hardware leave
about 1/16 inch (total 1/8" overall) on
either end so you can put in
a spacer between the wood corner and the
brass hardware.
4. Determine the length brass wood screw
you will need to remount the desk.
We do not send this because various
lengths may be appropriate.
Find the brass wood screws at ACE Hardware
or Lowes. 5. We strongly
encourage adding some support behind the desk, out of sight,
and centered
to support the new desk so that the book load is shared
between the lower
hinges and the support against the lid of the piano.
SH1064 $ 5.00 Pair
np Desk
Butt (Flap) Hinges-- 1-3/4" by 1"
Brass
SH567-1/2 $ 4.00 each
np Nickel
SH567
$ 9.00 each
np
REPAIR
THE OLD SPINET AND CONSOLE DESK

Channel Brass for Repairing
Music Desks-- Repair
split or worn music desk with these brass reinforcements.
Add to new desk to prevent abuse over the years.
For most Upright Spinets
SH1093
$ 14.20
np
Legs LEGS
FOR GRAND PIANOS OLD
TIME VICTORIAN ERA DESKS AND LEGS NOW AVAILABLE These items are aimed
at the Victorian period including square grands We
are not able to supply Upright Piano legs at this time.
Grand
Piano Desks 
Desks
are furnished unassembled and unfinished, but they are finely sanded ready for
finishing. Authentic styling and easy assembly make these desks a convenient
solution to damaged grand desks. Total width assembled is over size
in length. You will have to cut the parallel horizontal wood rails of the
desk to the right length (Do your math carefully) so that the end pieces are
snug on the mounting rail/support attached to the inside of the cabinet of
the piano. This desk is furnished with necessary hardware for assembly
and use (Slide mounted on case not provided) Hardwood*
(Solid wood, Must be stained) or Walnut** Veneer -- Part Number -- SH1850H* or
W** $ 186.00
np REPAIR
THE OLD GRAND PIANO DESK Channel
Brass for Repairing Music Desks on Grand Pianos
with lift and drop desk-- For Square Grands, the
Upright repair channel up the page may work.
Repair split or worn music desk with these brass reinforcements.
Add to new desk to prevent abuse over the years.
SH1092
$ 14.50
np
Grand
Lid Props and Hardware When
replacing a prop stick, be sure to put a rubber headed
tack on the stick between the stick and the casting of the harp where
it is to rest.  Grand
Prop Stick-- Steinway
style-- With short stick inset
31" long, Plain hardwood unfinished--
Old Part Number-
SH851 $ 75.50
np
 Grand
Prop-- Stock
item without short stick or hinge pin.
Hard maple, finely sanded and ready for finishing.
30" long x 2-1/2 inches wide x 7/8 inches thick-- Each
SH847
$ 32.00
np 22" long
x 2 inches wide x 7/8 inches thick-- Each
SH848
$ 27.00 np
One
rubber headed tack sent with invoice-- For prop stick only--
This will only be done if you mention it
when you order by phone
$ 1.00
np Grand
Prop Mounting Bracket
Polished Brass- Three screw holes- Brass pin to connect prop to bracket
Mounts to the inside of the cabinet rim
to hold the butt end if the
lid prop. May not fit exactly in your old screw holes- You will need
to do some retro-fitting
PK-RH-5803
$ 32.00 np Lid
Cups-- Wood,
Brass, and Nickel
Grand
Piano Desk Hardware Upright
Piano Desk Hardware Piano
Legs and Lyres and Hardware Grand
Piano Pedal and Lyre Hardware Pedal
Hardware General
Piano Hardware Menu Page
YOU CAN NOW ORDER BY PHONE WITH CREDIT CARD 
CALL:
(800) 338-8863
OR:
Go to Mail Order Form for printing: We
now take PayPal payment-- send email first.
Online
help available
NP |