| STORE HOURS 9 TO 6 CDT GMT minus 5 hours Monday thru Friday Do not call on Sat. Sun. please |
GRAND
PIANO HARDWARE
Ordering
instructions at the bottom of this page
SEARCH THE WHOLE SITE
| ORDERING INFORMATION: MINIMUM
ORDER: SHIPPING
POLICY: You MUST browse the Catalog area, and try to learn what you want. We no longer search our catalog for you. Have
this information ready: Make
sure you are in the catalog area for your kind of piano-- If you are confused, do not phone us until you have SENT E-MAIL and asked for help. If we do not answer the phone, we are probably here-- Just leave a message- we will
return your call (it may not be the same day). |
GRAND PIANO
HARDWARE ON THIS PAGE--
Some Upright Part
Hinges and action mounting hardware for
upright pianos are found under other
links listed on this page.
ELSEWHERE IN THE CATALOG:
GRAND
PIANO HARDWARE
Part Description Part Number Price
Grand Keyboard Spring-- Key cover
comes
to rest on this. Old No. 30549 SH959
$ 34.00 np
Grand Action Shift Springs-- Returns
the
key action frame after using quiet pedal.
Blued Steel- 16 gage steel
Length
Width Old No.
8 7/16" 1
3/4 " 30550A SH962
$ 11.20 np
5 5/16"
1 3/4 " 30551
SH963 $ 11.20 np
Grand
Fallboard (key lid) Hinges--
See illustration
Old
No.
30552
SH1068 $ 23.95 pair np
30553
SH1066 $ 20.00 pair np
30554
SH1062 $ 20.00 pair np
Grand Cover Catch--
Receives pin from lid
Satin Finish
30555A not available
Polished Chrome
30555A
not available
Modern Style with round receiver
below
the pin. Two pieces
SH939 not available
Grand Desk Brass Slides--
Desk slides on these- Pair
Can be used
to replace wooden slides.
14 inch (Old Part #-
30556) SH1072
$ 35.00 np
Grand lid support,
Solid brass- Hinged-
Short arm 2", long
arm 12"-
SH935 $ 18.75 np
Same as
above but nickel
SH936 $ 22.05 np
Fall Board
Shield--
Heavy transparent plastic shield
to cover the grand fall board face when open. 5 inches
wide but can be cut to fit. Can be adapted to protect the pedal box from
shoe damage.
Mounted with tension cord behind
the fall board. Not pretty when the fall board is
closed, but a lot prettier than those wretched fingernail scratches on the face
of the
unprotected fall board.
SH1001 $ 6.90 ea. np
Two, one for the fall board and one for the pedal
box
SH1001
$ 30.00 for six np
Grand Key Frame Screws--
Mounts under the keybed to level
bed and for bed to slide on when using quiet pedal.
7/8" long under head with slot in threaded end for adjusting.
Old Part No. 30559 SH1070
$ 1.15 np
Grand
Leg Sockets-- These are much more substantial than the ferrules elsewhere
on this page.
Solid cast brass-- For nickel
plated sockets, order these and send them off to be plated.
Inside Dimension
Height Metal
Old Part No.
Ordering No.
Price
1 1/2"
5/8" Polished Finish
Graphic No. 30560A
SH964A $
25.45 each np
1 3/4"
1 1/2" Polished
Finish Graphic No. 30561A
SH964B
$ 34.00 each np
2"
2" Polished Finish
Graphic No. 30562A
SH964C
$ 40.15 each np
Grand
Desk Rest--
Solid Brass--- 7
1/8 inch from knuckle to end
Complete with
staple, rubber cap, and screws.
Satin Brass
Finish Old Part Number 30565
SH941
$ 27.00 np
Polished
Nickel Old Part Number 30566
SH942
$ 32.70 np
Rubber
caps only (Cover parts) Old Part Number 30567A
SH941C $ 2.00 np
Desk
Support Hinge-- Solid brass four flap hinge. In graphic, see 30568-69-70
For desk that fold either forward of backward.
Furnished with screws.
1 3/8 inch
wide by 11 inches long- Satin Finish
SH940W $ 29.00
np
1 inch wide by 9 inch long-
Satin Finish
SH940N $ 23.65
np
1 inch wide by 6 3/16 inch long-
Satin Finish For spinet
pianos
SH940S $ 23.65
np
Desk Butt (Flap) Hinges-- 1-3/4" by 1"
Brass
SH567-1 $ 5.00 each
np
Nickel
SH567
$ 10.00 each np
Grand Quiet Pedal Lever--
This lever is underneath the piano
and activates the keybed when the pedal is used.
You may have to do some improvising to make it fit perfect. Old Part
No. in graphic 30547 SH1074 $ 29.90
np
Steinway Sostenuto Pedal String SH961 $ 20.00 np
Part Description Part Number Price
Grand Action Brackets-- Cast iron with screws-- Needed if one
breaks
Be sure the bracket in the
picture is the same as yours.
If the
new brackets are shorter than yours, add shims of maple wood
under the feet to lift the bracket into proper relationship
with the rest of
the action. Also,
the hammer rail may need to be remade or shimmed
to level the hammers with the action. Regulation will add the final
touch.
Aeolian-American No. 108 Type
See 30546 in the above graphic
SH1076 $ 18.55
ea np
Full set of three or four
of either style
$ 14.00 ea np
Mason & Hamlin since about 1975
305465B Not Available
Mason & Hamlin since about 1975 305465C
Not Available
Grand Desk Support Hinge--
Solid brass, satin finish
Square plate
1 1/8 inch by 3 3/4 inch
Hinge is 5/8 inch by 3
5/8 inch
Common on older Aeolian pianos
30543 Not Available
Fallboard hinges-- At ends of key cover
Heavy brass, satin finish,
1/4 inch thick
by 4 7/8 inch long 30576A
Not Available
1/8 inch thick
by 4 1/2 inch long 30576A
Not Available
Grand Piano Lock--
Complete with plunger, escutcheon,
(That's the little key lock diddly) and key.
Satin
brass finish--
Selvage plate 5/8" by 4
1/16"
Square ends to plate.
Key alone fits many grand locks
Grand lock with SQUARE end plates SH965
$ 74.50 np
Escutcheon only
SH965E $
3.00 np
Key only for grand locks
SH965K $ 11.00 np
Plunger sticker side of lock assembly SH965PS
$ 42.00 np
Grand lock with ROUND end
plates Not available
Mason
and Hamlin Style Desk Hinge
See Part Number
301078 in the graphic
SH1095 $ 9.50 each np
Grand
piano fall board lock key-- Steinway
Solid
brass with lyre design for Steinway grands before 1971
SH965KS
$ 34.00 np
Grand Leg Plates-- Cast iron, Set of
3 units (legs) -- Two interlocking plates to each unit.
Square-- 4 1/4 inch by 3 1/2 inch
305715 Not Available
Round-- 4 3/8 inch diameter
SH966
$ 107.00 np
REPAIR THE OLD GRAND PIANO DESK
Channel Brass for Repairing Music Desks on Grand Pianos with
lift and drop desk--
For Square Grands, the Upright
repair channel up the page may work. Repair split
or worn music desk with these brass reinforcements. Add to new desk to prevent
abuse over the years.
Old Part Number-- 30577
SH1092
$ 16.50 np
REPAIR THE OLD SPINET AND CONSOLE DESK
Channel Brass for Repairing Music Desks-- Repair split or
worn music desk with these
brass reinforcements.
Add to new desk to prevent abuse over the years.
For most Upright Spinets Old Part Number 30578
SH1093 $ 16.20 np
Grand
Agraffes
Some high quality uprights
also had grand piano type agraffes.
Go
to the Restringing Page for agraffes and tools for them.
See our Instructions on Agraffe Repair
Key Pins-- Mount between two middle
keys to support desk area or key top board--
2 3/4 inch long-- threaded 8/32 one end-- Two hex nuts-- Nickel
plated-- 30579
Not Available
Grand Hammer Rail
Prop-- Support piece in nearly all grand actions--
2 3/4 inch length
Old Part Number 30580B
SH1027
$ 10.95 np
Grand Hammer Rail Slotted Prop Nuts- See in graphic above at top right SH925 $ 2.00 ea. np
Grand
Lid Support Cups-- Receive the top end of the lid prop
Brass Finish-- Old Part Number
30586
SH938 $ 5.00
np
Nickel Finish--
30586N
SH938N $
8.60 np
Wood
cups--
Not Available
ORDER BY PHONE WITH CREDIT CARD
CALL
TOLL FREE: (800) 338-8863
If there is no answer, please leave
a message- we do answer our voicemail
OR:
Go to Mail Order Form for printing:
Online
help available 
NP
